- Next story Like It Or Not, Remote Learning Is Coming Back
- Previous story Sunday! “The Book of X” by Sarah Rose
Search
TEN SECOND BUZZ
- Open Mic for the week of 4/15/2024April 15, 2024204 Comments
- OJ Simpson: Football Great, Murder Suspect, and Convicted Felon, Dead at 76April 11, 2024115 Comments
- Open Mic for the week of 4/8/2024April 8, 2024158 Comments
- Open Mic for the week of 4/1/2024April 1, 2024357 Comments
- Sam Bankman-Fried Gets 25 Year Prison SentenceMarch 28, 202434 Comments
Features
Hot Posts
A Message From Devcat
We have been experiencing some system resource issues. We believe the problem may be resolved, but if it is not please bear with us.
Recent Comments
- Dark Matter in reply to Philip H on Open Mic for the week of 4/15/2024That is not the dictionary definition of tantrum. A tantrum is "an uncontrolled outburst of anger an…
- Dark Matter in reply to Philip H on Open Mic for the week of 4/15/2024Definition of "Tantrum" : an uncontrolled outburst of anger and frustration His prescribed solution…
- Jaybird on Planning The Annual Trip Around The WorldHaving been to Iceland in the current year, I can't imagine what it might have looked like back then…
- North on Open Mic for the week of 4/15/2024Holy buckets! A successful union drive in the south?
- Marchmaine in reply to InMD on Weekend Plans Post: The Aftermath of Catching UpHeh, I don't really keep track of directors... but looking at IMDB I liked Sherlock and Man from UNC…
- Jaybird in reply to Jaybird on Open Mic for the week of 4/15/2024Update about yesterday's missile attack on Iran: There have been no missile attack on Iran tonight,…
- Jaybird in reply to Michael Cain on Weekend Plans Post: The Aftermath of Catching UpWe always keep out two hoodies and two sets of fuzzy pajamas per person. We have a throw blanket for…
- Michael Cain in reply to Fish on Weekend Plans Post: The Aftermath of Catching UpI find that I’m much less extroverted now than I used to be... Kept granddaughter #3 on Wednesday wh…
- InMD in reply to Marchmaine on Weekend Plans Post: The Aftermath of Catching UpI'm skeptical of the reviews. It's solidly fresh on RT but even the good ones from the top critics s…
- Michael Cain on Weekend Plans Post: The Aftermath of Catching UpSo, having swapped out the flannel for linen, and broken out the summer clothes, how are you dealing…
Comics
-
Planning The Annual Trip Around The World
April 19, 2024
-
April 18, 2024
-
April 17, 2024
-
April 16, 2024
More Comments
- Jaybird on Weekend Plans Post: The Aftermath of Catching Up
- Jaybird in reply to Marchmaine on Weekend Plans Post: The Aftermath of Catching Up
- Jaybird in reply to fillyjonk on Weekend Plans Post: The Aftermath of Catching Up
- Jaybird in reply to Philip H on Open Mic for the week of 4/15/2024
- Jaybird in reply to Chip Daniels on Open Mic for the week of 4/15/2024
- Philip H in reply to Pinky on Open Mic for the week of 4/15/2024
- Fish in reply to fillyjonk on Weekend Plans Post: The Aftermath of Catching Up
- Pinky in reply to Philip H on Open Mic for the week of 4/15/2024
- Pinky in reply to Philip H on Open Mic for the week of 4/15/2024
- Philip H in reply to Pinky on Open Mic for the week of 4/15/2024
- Pinky in reply to Philip H on Open Mic for the week of 4/15/2024
- Philip H in reply to Pinky on Open Mic for the week of 4/15/2024
- Philip H in reply to Jaybird on Open Mic for the week of 4/15/2024
- Chip Daniels on Open Mic for the week of 4/15/2024
- Chip Daniels in reply to Jaybird on Open Mic for the week of 4/15/2024
I’ll admit it — I have darned socks. I have my grandmother’s old darning egg, and had a tendency to put a toe through the padded knee-high socks I wore during fencing sometimes.Report
I darn socks all the time. The last time was about three days ago, on a heal that was wearing through. The week before that I was darning a the ball area on a sock that had already had the heel darned. I use an LED light bulb for a darning egg.
Everybody says it makes no sense to darn socks, and that I should just run out an buy more socks. I tell them that when the apocalypse hits, or perhaps during the coming civil war, they’ll be coming to me inside of six months to get their socks darned, because the sock factories will be shut down.
When we send humans to colonize Mars, there’s not way they’re going to send enough socks with them. One of the critical skills of a space colonist will be darning.
I’m wondering if Elon should send a couple of vintage, hand-cranked sock knitting machines.
Youtube video of making a sock.Report
What’s the equivalent of darning for pressure suits adequate to deal with the external environment on Mars?Report
Well, you wear the socks the 99% of the time your not on an EVA.
As an aside, I had an idea for a force-free suit joint that I haven’t had time to prototype.
You stitch up a typical sleeve, with the usual gathers around the elbow (like a wooly worm section), with two pieces of nylon that that keep the worm section from stretching out. That’s pretty much the standard pressure suit elbow or knee joint, as you’d have on a Russian or US suit. But since it’s not a constant volume joint, it wants to straighten out under pressure.
So you build one and measure it’s torque-displacement curve (you can see some of these posted for various designs). The more you bend such a joint, the harder it is to bend.
But for any particular joint, that torque-displacement curve is constant. So all you have to do is counter the torque by a fixed function of joint angle. To do that, you give the joint a natural elbow. For an elbow you use some short rods and a bearing, or just a couple of rods joined with a piece of nylon webbing, or you use solid pipes for the straight sections away from the joint, with the upper and lower sections, looking much like a medieval armor.
Then you attach a tendon cable, which will act just like the tendon connecting your bicep to your forearm. The tendon cable could attach to a spring, somewhat counter-acting the natural tendency of the suit joint to straight under pressure.
But then you have the spring pull on a cord that goes around a pulley, while a second sheave of the pulley is cut as a cam that’s based on the natural torque-angle curve of the suit joint. That should allow you to completely cancel the joint’s natural stiffness.
But instead of a spring, you could use an air piston, with one end open to vacuum and the other end connected to the suit pressure, so that the force applied to the pulley/cam system by the piston is directly proportional to the pressure differential of the suit. As an interesting aside, what this mechanism ends up doing is making a constant-volume suit joint, with the motion of the air-piston exactly compensating for the change in internal volume caused by flexing the joint. Thus no work is performed in bending the joint.
At some point maybe I’ll try to build a little prototype. When I was last looking at doing it, I had a piece of nylon tent cloth sewn into a tube, and was trying to find a good sealing compound. There are quite a few polyurethane coatings used for inflatable rafts that might work well.
If you got really fancy with the cams and cables, I think you could make a 3-D joint on the same principles, for a neck, a torso, or possibly a hip.Report
I had a vinyl air mattress that had some small leaks in it, due to a small black kitty, so I just cut it up to form a leg. Air beds are made as tubes, internally, and it’s trivial to cut them into what I need. I’m not sure that I can properly make a caterpillar joint in vinyl as opposed to nylon, but it’s something to play with.Report